Apple Macintosh PowerBook 1400 Guide d'installation télécharger pdf (Page 5)

Cable

Metal Frame

8 PowerBook 1400

Step 5: To move the keyboard, grasp

the metal frame at the top of the

keyboard and gently pull the key-

board up. Without putting stress on

the keyboard cable, gently turn the

keyboard onto the top case. Do not

disconnect the keyboard cable.

Step 6: Locate the hard drive

situated to the left of the case

bottom. Remove the 2 screws

securing the hard drive bracket.

Insert a flat-blade screwdriver into

the small depression indicated and

pry the shielded drive up. Swing

the drive outward so that it is

carefully sitting on the edge of the

case. You may need to gently but

firmly pull on the hard drive/

ribbon assembly to provide some

slack in the hard drive ribbon so as to allow you to maneuver the

ribbon connector, epecially when replacing it back onto the replace-

ment hard drive.

Caution: Great care must be taken in this action; if the ribbon is

damaged you will need to remove the logic board in order to

replace it.

Step 7: Grasp the ribbon strap and

disconnect the ribbon from the

hard drive by carefully pulling the

ribbon straight off to prevent

damage to the pins.

Strap

Cable

Screw

Drive

Depression

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Apple Macintosh PowerBook 1400 Guide d'installation Page 5