Apple LaserWriter II NT Spécifications télécharger pdf (Page 64)

52

Installing SIMMs.

Note For configurations where two SIMMs are to be

installed, always begin installation with slot 2.

Refer to the SIMM-slot placement rules at the

beginning of this Appendix for information as to

which type of SIMM is installed into which slot.

1. Remove the new SIMM from its antistatic

package. Hold the board with your forefingers on

the side edges and your thumbs against the back

edge, as shown in Figure B-1.8. Turn the board

so the notch on one end is on the bottom and the

metal teeth face toward the slot.

Figure B-1.8. Positioning the SIMM.

2. Hold the SIMM board at a 30-degree angle to the

slot and push the edge of the board evenly and

firmly into the slot, as shown in Figure B-1.9.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 101 102

Commentaires sur ces manuels

Pas de commentaire