Apple LQ Manuel d'utilisateur télécharger pdf (Page 2)

DIP switch settings

In Chapter 2 of the the ImageWriter LQ Owner’s Guide, you’ll find instructions for

changing the DIP switch settings on switch number SW2-8. The DIP switch has been

set to the closed position.With the switch in this position, the printer advances pin-feed

paper far enough so that you can easily tear off the last form. This switch setting also

eliminates the possibility of printing on the previous page or on the platen, when using

applications with no preset top margin.

Ignore the instructions for setting the switch if you want to tear off the last form of your

pin-feed paper, or if your application does not have a preset top margin. If, on the

other hand, you do not want the paper to advance past the top-of-form mark on the

paper guide, use the instructions in the “Changing DIP Switch SW2-8” section of

Chapter 2. Be sure to set the switch to Open.

Cut Sheet Feeder

The optional Cut Sheet Feeder for the ImageWriter LQ has been redesigned. The

ImageWriter LQ Owner’s Guide provides instructions for setting up and installing the

Cut Sheet Feeder on your printer. In these instructions, the manual refers to the

forward collator as a separate piece that you need to install on the feeder. This step is

no longer necessary. The forward collator is no longer a separate piece; it is now a

molded part of the Cut Sheet Feeder itself.

Paper separator

Your ImageWriter LQ Owner’s Guide provides instructions for installing the paper

separator and explains that the separator is necessary only if you use rear-feed paper

paths.

The paper separator now comes installed. Accordingly, you can ignore the installation

instructions. It has also been redesigned to stay in the printer at all times, regardless of

the paper path you choose.

Apple, the Apple logo, ImageWriter, and HyperCard are registered trademarks of

Apple Computer, Inc.

1 2

Pas de commentaire

Apple LQ Manuel d'utilisateur Page 2