Apple PC Serial and Parallel Card Manuel d'utilisateur télécharger pdf (Page 29)

Opening the computer

1Shut down the computer and disconnect all cables from the computer, except for the

power cord.

Leave the computer plugged in for now, to ground it and protect its

components from static electricity damage.

2If the security bar is installed, remove it by removing the screw under the front panel and

pressing the center of the bar.

Note: The computer in the illustration is a Power Macintosh 7300. Not all

computers come with or can accept a security bar. If your computer did not

come with a security bar, skip this step.

First remove the screw.

Then press the security bar near

its center to release it from the computer.

Installing the Card in a Power Macintosh 7200, 7300, 7500, or 7600

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 83 84

Pas de commentaire

Apple PC Serial and Parallel Card Manuel d'utilisateur Page 29