Apple Xserve G5 Manuel d'utilisateur télécharger pdf (Page 49)

Xserve G5 Take Apart - 47

Front Panel Board

Procedure

1. Disconnect the FireWire cable from the front panel board.

2. Release the two locking levers on the front panel board cable connector and

disconnect the cable from the front panel board.

3. Remove the two screws that mount the front panel board to the chassis.

4. Slide the board back slightly and release the two clips on either side of it.

5. Tilt the board up and remove it from the server.

Important: When replacing the front panel board, make sure the board slides under the

black plastic cover of the light pipe.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 93 94

Pas de commentaire

Apple Xserve G5 Manuel d'utilisateur Page 49