Apple IN20 Series Spécifications télécharger pdf (Page 12)

Adjusting the image

If necessary, adjust the height of the projector by pressing the elevator foot

release button to extend the foot.

If necessary, rotate the leveling foot located at the rear of the projector.

Avoid placing your hands near the hot exhaust vent at the side of the projec-

tor.

Position the projector the desired distance from the screen at a 90 degree

angle to the screen.

See page 5 for a table listing screen sizes and distances.

Adjust the zoom or focus.

If the image is not square, first make sure that the projector is perpendicular

to the screen. If the image is larger or smaller on the top or bottom edge of

the screen, press the top Keystone button to reduce the upper part of the

image, and press the bottom Keystone button to reduce the lower part.

If the left or right side of the screen is larger or smaller the other, you can

turn the projector to the left or to the right a few degrees to square the

image.

Adjust the Contrast or Brightness in the Picture menu. See page 28 for help

with these menu adjustments.

For Aspect Ratio, keep in mind that DVD players must be configured for

16:9 in order to view the highest quality image. For more information

regarding Aspect Ratio, see

page 12.

adjust height

elevator

foot

release button

adjust distance

adjust zoom or focus

focus

(front ring)

(rear ring)

zoom

adjust keystone

adjust Picture menu

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 40 41

Pas de commentaire

Apple IN20 Series Spécifications Page 12