Apple Version 3 Manuel d'utilisateur télécharger pdf (Page 11)

       "     )      



$









$ 

#) 

#) #) 

#) 





In this chapter we will discuss the physical installation of

NetPurifier and how to connect a browser to NetPurifier in

preparation for configuration.

Installation

Location

NetPurifier should be installed in a clean, dry location located

within near available hub/switch port of the network that is to be

filtered.

AC Power

Connect the supplied AC Power cord to the NetPurifier and a

properly grounded 115VAC outlet.

Network Connection

Connect either the supplied network cable (6ft) or your own

network cable between the NetPurifier’s network connector and a

port on your hub or switch. NetPurifier works on 10baseT and

100baseT networks.

Note: NetPurifier may be connected to any point in

the network as long as it is on the same subnet

as the network it will filter.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 48 49

Pas de commentaire

Apple Version 3 Manuel d'utilisateur Page 11