Apple TM546 Guide de l'utilisateur télécharger pdf (Page 64)

E-DOC-CTC-20051017-0144 v1.0

Chapter 4

SpeedTouch™ Web Interface

4.5.10 Firewall

About the firewall The firewall allows you to secure traffic from and to the SpeedTouch™. There are

different security levels, depending on the degree of security you need.

Overview The Overview page summarizes the overall security policy configured on your

SpeedTouch™.

Configure On the Configure page you can select the security level of the SpeedTouch™.

Security Levels Select one of following security levels:

 BlockAll:

All traffic from and to the Internet is blocked. Game and Application Sharing is

not allowed by the firewall.

 Standard:

All outgoing connections are allowed. All incoming connections are blocked,

except for inbound connections assigned to a local host via Game and

Application Sharing.

 Disabled:

All in- and outgoing traffic is allowed to pass through your SpeedTouch™,

including Game and Application Sharing.

This is the default firewall level.

Although BlockAll should block all connections, some mandatory types

of traffic such as DNS will still be relayed between LAN and WAN via

the SpeedTouch™.

The firewall levels only have impact on the forward hook. This means that

the handling of traffic from and to the Web pages of the SpeedTouch™ is

independent of the selected firewall level.

Protocol checks will be performed on all accepted connections, irrespective

of the chosen level. You can only disable protocol checks via the CLI.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 91 92

Pas de commentaire

Apple TM546 Guide de l'utilisateur Page 64