Apple Time Capsule Guide d'installation télécharger pdf (Page 11)

Chapter 1

Getting Started

When you plug your Time Capsule into a power outlet, the status light flashes green

for one second and then glows amber while your Time Capsule starts up. After your

Time Capsule has started up completely, the status light flashes amber until your Time

Capsule has been updated with the correct settings. The status light glows solid green

after your Time Capsule is properly set up and connected to the Internet or a network.

When you connect Ethernet cables to the Ethernet ports, the lights above them glow

solid green.

The Time Capsule Status Light

The following table explains the Time Capsule light sequences and what they indicate.

Light Status/description

Off

Your Time Capsule is unplugged.

Solid amber

Your Time Capsule is completing its startup sequence.

Flashing amber

Your Time Capsule can’t establish a connection to the network

or the Internet, or is encountering a problem. Make sure you

have installed AirPort Utility and use it to get information about

what might cause the status light to flash amber. See “If Your

Time Capsule Status Light Flashes Amber” on page 27.

Solid green

Your Time Capsule is on and working properly. If you choose

Flash On Activity from the Status Light pop-up menu (in the

Base Station pane of AirPort settings in AirPort Utility), the status

light may flash green to indicate normal activity.

Flashing amber and green

There may be a problem starting up. Your Time Capsule will

restart and try again.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Pas de commentaire

Models	Document Type
MW-1652 W	User Manual Инструкция по эксплуатации MAXWELL MW-1652 W, 2 pages
MW-1653 BK	User Manual Инструкция по эксплуатации MAXWELL MW-1653 BK, 2 pages

Apple Time Capsule Guide d'installation Page 11