Apple Power Mac G5 PCI Card Guide Spécifications télécharger pdf (Page 66)

Power Mac G5 Take Apart - 55

Power Supply

Procedure

1. Remove the black plastic caps covering the two power supply cable connectors.

Note: The caps fit tightly over the connectors. To remove them, rock the caps gently

forward and backward as you lift up.

2. Press in on the release latch on the ﬁrst power supply cable connector and disconnect

the cable from the logic board. Repeat for the other power supply cable.

3. Remove the two screws that secure the power supply top cover, and remove the cover

from the enclosure.

Warning: Whenever the power supply cover is removed, be very careful not to drop

any screws into the power supply. Doing so could short out the unit.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 110 111

Pas de commentaire

Apple Power Mac G5 PCI Card Guide Spécifications Page 66