Apple Xserve RAID User's guide Guide de l'utilisateur télécharger pdf (Page 45)

CHAPTER

5 Using the Xserve RAID System

After you’ve connected to the host system or switch, you can turn on Xserve RAID and use

the RAID Admin software to conﬁgure it.

Starting Up the System

When you plug the power cords into Xserve RAID, the system begins its internal diagnostics.

During this time (about 30 seconds), you cannot use the power button to turn on the

system.

When the diagnostics are complete, the small light next to the power button blinks. Press the

power button when the light blinks and wait about 1 minute for the system to initialize.

Status lights on the front and back panels indicate network connection, system activity, and

drive module use. See “Using Status Lights and Other Indicators” on page 46 for more

information.

Detailed instructions for conﬁguring RAID storage and management software are provided in

the document “Using RAID Admin and Disk Utility” on the CD that came with your system.

Power button

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 91 92

Pas de commentaire

Apple Xserve RAID User's guide Guide de l'utilisateur Page 45