Apple Xserve (Cluster Node) Manuel d'utilisateur télécharger pdf (Page 5)

Remove the protective faceplate from the server’s front panel by unscrewing the

thumbscrews at each side of the faceplate and lifting it off. Remove the additional shipping

screws on either side of the server. (The shipping screws do not need to be reinstalled unless

you intend to transport your server.)

Remove any plastic ﬁlm from the front and rear of the server’s cover.

See “Summary of Hardware Installation” on page 12 for more information about installing

the server in a rack.

Your Server Hardware

Your model of the Xserve system differs somewhat from the model illustrated in the

Xserve

User’s Guide.

The illustrations on the pages that follow provide a reference for the speciﬁc

features of your server’s hardware.

Protective faceplateRemove the two shipping screws.

There is one screw on either

side of the server.

Remove the four thumbscrews that hold the protective faceplate

in place, and remove the faceplate by lifting it straight up.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Pas de commentaire

Apple Xserve (Cluster Node) Manuel d'utilisateur Page 5