Apple Xserve (Early 2008) DIY Procedure for Fan Array wi Manuel d'utilisateur télécharger pdf (Page 3)

Xserve (Late 2006/Early 2008) Fan Array Replacement Instructions 3

Removing the Installed Fan Array

Note: Before you can remove the fan array, you must remove the airow duct.

Airow Duct

Loosen the ve Phillips screws that fasten the airow duct to the fan array.1.

Pull up on either side of the airow duct, and lift it straight up and out of the Xserve. 2.

Caution: Try not to completely remove the screws from the airow duct. Tiny black rubber

washers hold these screws captive on the underside of the airow duct. If the screws are

completely removed, these washers can easily fall into the enclosure and become lost.

1 2 3 4 5 6 7

Pas de commentaire

Apple Xserve (Early 2008) DIY Procedure for Fan Array wi Manuel d'utilisateur Page 3