Apple Xserve (Early 2008) DIY Procedure for Front Bezel Manuel d'utilisateur télécharger pdf (Page 3)

Xserve (Early 2008) Front Bezel Brackets Replacement Instructions 3

Removing the Installed Front Bezel Brackets

From behind the front bezel, remove the four identical 4-mm long screws and the two brackets.

Important: When removing or replacing the bezel brackets, be careful not to put pressure on the

top of the bezel over the optical drive slot.

Installing the Replacement Front Bezel Brackets

Position the right replacement bracket on the server, and install its two mounting screws.1.

Repeat for the left replacement bracket. 2.

1 2 3 4

Pas de commentaire

Apple Xserve (Early 2008) DIY Procedure for Front Bezel Manuel d'utilisateur Page 3