Apple Xserve Intel (Late 2006) DIY Procedure for Backpla Manuel d'utilisateur télécharger pdf (Page 5)

Xserve (Late 2006) Backplane-to-Logic Board Cable Instructions 5

Installing the Replacement Backplane-to-Logic Board Cable

Connect the replacement backplane-to-logic board cable to the logic board and the drive

interconnect backplane.

Replacing the Airow Duct

Lower the airow duct into position on the logic board.

Note: When installing the airow duct, be sure to route both the front panel board cable and

the backplane-to-logic board I/O cable inside the channel under the left side of the duct.

1 2 3 4 5 6 7

Pas de commentaire

Apple Xserve Intel (Late 2006) DIY Procedure for Backpla Manuel d'utilisateur Page 5