Apple Xserve Intel (Late 2006) DIY Procedure for Power D Manuel d'utilisateur télécharger pdf (Page 11)

Xserve (Late 2006) Power Distribution Board Replacement Instructions 11

Replacing the Drive Interconnect Backplane

Lower the backplane into the enclosure at a slight angle (as shown), and carefully align the

front edge of the backplane with the four backplane alignment slots in the enclosure. Be

careful not to let any backplane components come into contact with the standos or the

enclosure as you install the backplane.

Rotate the backplane downward and over the four mushroom-shaped standos.

Slide the backplane in the direction of the arrow shown to fully seat the backplane in the

enclosure.

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Apple Xserve Intel (Late 2006) DIY Procedure for Power D Manuel d'utilisateur Page 11