Apple Xserve Intel (Late 2006) DIY Procedure for Process Manuel d'utilisateur télécharger pdf (Page 8)

Xserve (Late 2006) Processor Replacement Instructions 8

Holding the processor by its edges only, place the processor into its holder on the logic

board, being careful not to get any thermal grease on the contacts of either the processor or

its socket holder.

Note: When installing the processor on the logic board, align the processor notch with the

tab on the processor holder, as illustrated. Then lower the processor straight down onto the

socket.

Rotate the top of the holder to the closed position.

Engage the latch on the processor holder.

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Apple Xserve Intel (Late 2006) DIY Procedure for Process Manuel d'utilisateur Page 8