Apple Xserve Manuel d'utilisateur télécharger pdf (Page 35)

Chapter 2 Installing or Replacing Components 35

Installation Rules

You must install DIMMs in pairs, and the DIMMs in each pair must be identical. The first

pair is installed in slots 1 and 2. Install the next pair in slots 3 and 4. Subsequent pairs

go in slots 5 and 6, and then slots 7 and 8.

For Best Performance

For the best possible performance, install eight identical DIMMs in slots 1–8. If you

don’t have eight matching DIMMs, install four identical DIMMs in slots 1–4 and a

second set of four identical DIMMs in slots 5–8.

Always fill slots 1–4 before you install DIMMs in slots 5–8. After you fill slots 1–4, add a

full set of four DIMMs in slots 5–8 instead of just a pair in slots 5 and 6.

The server comes

with at least 2 DIMMs

Add the next pair

in these two slots

(Back)

12 34 56 78

(Front)

Add the next pair

in these two slots

Add the next pair

in these two slots

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Pas de commentaire

Apple Xserve Manuel d'utilisateur Page 35