Apple Multiple Scan Display 1705 Guide de l'utilisateur télécharger pdf (Page 53)

Choosing a good location for your display

Here are some key factors to consider when determining where to place

your display:

m Be sure that the desk or table can support the display’s weight—

approximately 45.2 pounds (20.5 kilograms).

m Make sure that the power cord and display cable will reach from the back

of the display to your computer.

m The display cable should be unobstructed when you swivel and tilt the

display, so allow at least 7 inches (17.5 cm) of clearance in the back. If you

don’t allow enough clearance, the display connector might be damaged

when the cable hits an obstruction.

Positioning the display

IMPORTANT

When you unpack or move the display, don’t set the display down

at an angle; you might damage the display stand.

Once your display is in place on a desk or table, follow these steps:

1Place the display so that the screen faces you.

2Adjust the viewing angle of the display by tilting it up or down and turning it left or right

on its stand.

Position the display so that when you use it, no bright light is behind the

display or reflected on the screen. Your eyes should be about level with the

top edge of the screen and between 18 and 28 inches (45 to 70 cm) away.

Ta ke occasional breaks when using your computer to focus your eyes on a

distant object.

Setting Up for IBM PC-Compatible Users

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59

Pas de commentaire

Apple Multiple Scan Display 1705 Guide de l'utilisateur Page 53