Apple eMac ATI Graphics (Memory Replacement) Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Ordinateurs Apple eMac ATI Graphics (Memory Replacement). Apple eMac ATI Graphics (Memory Replacement) User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
eMac (ATI Graphics) and eMac (USB 2.0)
Memory
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Tools Required
#2 Phillips screwdriver
Opening the User Access Door
1. Save all open documents and quit all open applications.
2. Turn the computer off by choosing Shut Down from the Special menu (if using Mac OS
9), or choose Shut Down from the Apple menu (if using OS X).
3. Unplug all cables, except the power cord, from the computer. (Figure 1)
Warning:
If the internal modem is connected to a telephone line, disconnect the
telephone line from the internal modem port before you open the user access door.
This prevents electric shock.
Figure 1
Vue de la page 0
1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Replacement Instructions

 eMac (ATI Graphics) and eMac (USB 2.0) MemoryReplacement Instructions Follow the instructions in this sheet carefully. Failure to follow these in

Page 2

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 2 4. Place a soft towel or cloth on the desk or surface. Position the computer so the screen is faci

Page 3

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 3 6. Important: To avoid electrostatic discharge, always ground yourself by touching metal before

Page 4 - Removing the Installed Memory

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 4 Removing the Installed Memory 1. Push down the ejectors on the slot of the memory module you want

Page 5 - Procedure

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 5 Installing Memory RAM Expansion Module Specifications The RAM expansion modules used in the eMac an

Page 6

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 6 3. Align the replacement memory module in the memory slot, apply pressure evenly to both top corne

Page 7 - Closing the User Access Door

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 7 Closing the User Access Door 1. Replace the screw on the user access panel. (Figure 7) Figure 7 2.

Page 8

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 8  Apple Computer, Inc.© 2004 Apple Computer, Inc. All rights reserved.Under the copyright laws, t

Commentaires sur ces manuels

Pas de commentaire