Apple Xserve (Early 2008) DIY Procedure for Drive Interc Manuel d'utilisateur télécharger pdf (Page 7)

Xserve (Late 2006/Early 2008) Drive Interconnect Backplane Replacement Instructions 7

Release the two locking levers on the front panel board cable connector and disconnect the 3.

cable from the front panel board. Move the front panel board cable out of the way.

Disconnect the backplane-to-logic board I/O cable from the backplane.4.

Loosen the thumbscrew that secures the backplane to the enclosure. 5.

Note: The thumbscrew is captive; you cannot remove it.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Apple Xserve (Early 2008) DIY Procedure for Drive Interc Manuel d'utilisateur Page 7