Apple Xserve (Early 2008) DIY Procedure for Light Pipe A Manuel d'utilisateur télécharger pdf (Page 3)

Xserve (Early 2008) Light Pipe Assembly Replacement Instructions 3

Removing the Installed Light Pipe Assembly

From behind the front bezel, locate the four screws and two brackets. Remove the four 1.

identical 4-mm long screws and the two brackets.

Remove the 8-mm long center screw (with star washer) that attaches the top of the bezel to 2.

the server.

Gently pull the front bezel forward, and remove it from the server.3.

Important: When removing or replacing the bezel, be careful not to put pressure on the top

of the bezel over the optical drive slot.

1 2 3 4 5 6

Pas de commentaire

Apple Xserve (Early 2008) DIY Procedure for Light Pipe A Manuel d'utilisateur Page 3