Apple Xserve (Early 2008) Manuel d'utilisateur télécharger pdf (Page 32)

32 Chapter 2 Installing or Replacing Components

7 Loosen the thumbscrews at the back of the top cover and slide the cover back and up

to remove it.

If you have difficulty removing the cover, check the enclosure lock on the front panel.

Important: To minimize the possibility of damage to Xserve components due to static

discharge, wear an antistatic wrist strap while you work inside the Xserve.

8 When you’re finished working inside the Xserve, replace and secure the cover, slide the

Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve in

the rack. If the server case was locked, use the enclosure key to lock the security lock

on the front panel.

Unscrew the two

captive thumbscrews.

Slide the cover back and lift it off.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Pas de commentaire

Apple Xserve (Early 2008) Manuel d'utilisateur Page 32