Apple Xserve (Original) Manuel d'utilisateur télécharger pdf (Page 30)

30 Chapter 3

Once you’ve marked the exact position for the server on the rack, you’re ready to attach the

server. Here is an overview of the procedure.

m Connect the cover of the server to the front of the rack.

m Assemble the rear mounting hardware.

m Connect the rear mounting hardware to the server enclosure.

m In a four-post rack, install the cable-management arm.

m Slide the server into the cover and secure it.

Follow these steps to attach the server to the rack.

1 Keep the cover of the enclosure level and support it from the center as you slide it into the

rack at the desired position.

Important Work with someone else to make sure the cover is supported and square to the

rack. The cover must be installed level to avoid changing its shape before the screws are

inserted to hold it in place.

Have someone support the

cover in the center while you

attach it to the rack.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

Pas de commentaire

Apple Xserve (Original) Manuel d'utilisateur Page 30