Apple Xserve (Original) Manuel d'utilisateur télécharger pdf (Page 65)

Installing or Replacing Server Components 65

5 Locate the PCI/AGP slot at the back right side of the server.

6 Prepare the card slot by doing one of the following:

m If a card is already in the slot, remove it by grasping the edges and gently pulling it toward

the left side of the enclosure.

Store the card in static-proof packaging made to protect it.

m If no card is in the slot, be sure to remove the slot cover (which came loose when you

loosened the cover’s thumbscrew on the back panel).

PCI/AGP combo card slot

Pull the PCI/AGP card to the side to

disengage it from the connector, and

then pull it up and out of the server.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 77 78

Pas de commentaire

Apple Xserve (Original) Manuel d'utilisateur Page 65