Apple Setting Up Your Power Macintosh G4 (PCI & AGP) Manuel d'utilisateur télécharger pdf (Page 37)

Working Inside the Computer 37

2 Align a DRAM DIMM in the DRAM slot as pictured and push the DIMM down until the

ejectors snap into place.

To remove a DIMM, gently push down on each of the slot’s ejectors until they open and

release the DIMM.

Important Do not touch the DIMM’s connectors. Handle the DIMM only by the edges.

DRAM DIMM (Your DIMM’s shape and components may vary.)

Ejector

(Your slot may have one or two ejectors.

They should be pushed outward and down

to be in the open position, as shown.)

The DRAM DIMM is designed to fit into the

slot only one way. Be sure to align the

notches in the DIMM with the small ribs

inside the slot. With the ejectors in the open

position (as shown), push down on the

DIMM until it snaps into place. The ejectors

will automatically close.

Connectors Notches DRAM slot (1 of 4)

Ribs (inside slot)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 61 62

Pas de commentaire

Apple Setting Up Your Power Macintosh G4 (PCI & AGP) Manuel d'utilisateur Page 37