Apple Xserve (Drive Interconnect Board Replacement) Manuel d'utilisateur télécharger pdf (Page 8)

Xserve Drive Interconnect Board -

Drive Interconnect Board

1. Disconnect the following cables from the drive interconnect board:

(Figure 8)

• optical drive cable

• power supply cable

• locking switch cable

• front panel board cable

• FireWire cable

Figure 8

2. Release the three thumbscrews that secure the drive interconnect board to the

chassis.

(Figure 9)

3. Lift the board slightly to clear the two mounting pegs near both ends of the board.

4. Pull the board back, tilt it up so that the connectors clear the chassis, and remove the

board from the server.

Figure 9

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Apple Xserve (Drive Interconnect Board Replacement) Manuel d'utilisateur Page 8