Apple Xserve (Drive Interconnect Board Replacement) Manuel d'utilisateur télécharger pdf (Page 9)

Xserve Drive Interconnect Board -

Installing the Replacement Drive Interconnect Board

1. Install the replacement drive interconnect board on the two mounting pegs in the

chassis.

(Figure 10)

2. Check that the board engages with the three brackets on the chassis.

3. Press the board ﬁrmly toward the front of the server, and tighten the three

thumbscrews that secure the board to the chassis.

Figure 10

4. Connect the following cables to the drive interconnect board:

(Figure 11)

• optical drive cable

• power supply cable

• locking switch cable

• front panel board cable

• FireWire cable

Figure 11

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Apple Xserve (Drive Interconnect Board Replacement) Manuel d'utilisateur Page 9