Apple Xserve (Heatsink Duct Replacement) Manuel d'utilisateur télécharger pdf (Page 1)

073-0705 Rev. A

Xserve

Heatsink Duct

Replacement Instructions

Follow the instructions in this sheet carefully. Failure to follow these instructions could

damage your equipment and void its warranty.

Note:

Online instructions covering customer-installable parts are available at

http://www.info.apple.com/installparts/.

Tools Required

No tools are required for this procedure. You may, however, ﬁnd a Phillips screwdriver

useful in releasing the thumbscrews at the front of the server.

Opening the Server

The server slides open from the front of the rack. The top cover remains in place in the

rack while the bottom housing (containing all internal components) should be placed on a

sturdy, ﬂat surface.

1. Alert users that the server will be unavailable for a period of time.

2. Shut down the server.

Warning: To avoid damaging internal components or causing injury, always

shut down the server before opening it. After you shut down the server, internal

components can be very hot. Let the server cool down before continuing.

3. Write down the server’s serial number, which is located on the back panel. If it is

necessary to set up the server’s software after you replace the heatsink duct, you will

be asked for the serial number at login.

1 2 3 4 5

073-0705 Rev. A ð Xserve Heatsink Duct Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instructio

Page 2

Xserve Heatsink Duct - 2 4. If the server is in the locked position (the yellow security LED on the front panel is on), use the Allen key that came

Page 3

Xserve Heatsink Duct - 3 9. Grasp the thumbscrews and slide the bottom housing forward part way to expose the two chassis levers. (Figure 2) 10. Wh

Page 4

Xserve Heatsink Duct - 4 Removing the Installed Heatsink Duct 1. Release the latch on the heatsink duct from its slot, slide the duct away from the

Page 5

Pas de commentaire

Apple Xserve (Heatsink Duct Replacement) Manuel d'utilisateur Page 1