Apple Server Diagnostics Manuel d'utilisateur télécharger pdf (Page 19)

Chapter 2 Setup and Installation 19

To set up a NetBoot server:

1 Open Server Admin (located in /Applications/Server/).

2 If the server that will host NetBoot isn’t listed, click the Add (+) button and choose

Add Server. Enter the IP address of the server in the Address eld, enter the user name

and password of the server administrator in the User Name and Password elds,

and then click Connect.

3 Click the disclosure triangle for the server that will host NetBoot.

4 If NetBoot isn’t listed, select the server and click Settings. In the Services pane, select

NetBoot and then click Save.

5 Select NetBoot, click Settings, and then click General.

6 In the “Enable NetBoot on at least one port” list, select the Enable checkboxes for the

interfaces that you want to serve the Server Diagnostics NetBoot images over.

If multiple network interfaces are listed, it’s likely that only one of the interfaces is

on the same subnet as your server. If you’re not sure which interface is on the same

subnet, open Network Utility (located in /Applications/Utilities/) on your NetBoot

server and your server. In the Info pane, choose dierent network interfaces on the

NetBoot server and your server and compare the IP Address elds. Usually, computers

are on the same subnet if their IP addresses start with same numbers (for example,

they may both start with 192.168.2).

7 In the volume list, select the Images checkbox and Client Data checkbox for the

volume that will store the Server Diagnostics NetBoot image.

The volume must have at least 30 MB free.

8 Click Save.

9 In a Finder window, navigate to the Diagnostics folder on the Admin Tools disc, and

then open AppleServerDiagnosticsNetBoot.pkg.

10 Follow the onscreen instructions to install the Server Diagnostics NetBoot package.

11 In Server Admin, select NetBoot, and then click Images.

12 If the Server Diagnostics NetBoot image has the same index (listed in the Index

column) as another image, deselect the Enable checkbox for the conicting image.

Don’t change any of the default Server Diagnostics NetBoot image settings.

13 Click Start NetBoot.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Pas de commentaire

Apple Server Diagnostics Manuel d'utilisateur Page 19