Apple Server Diagnostics Manuel d'utilisateur Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 54
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
Chapter 3 Starting Up Server Diagnostics 25
If the Xserve EFI requires a password, you won’t be able to start up a NetBoot image
using the front panel. You need to disable the rmware password before you can use
the front panel. To disable the password, you must be able to start up Mac OS X Server
on the Xserve.
To use the Xserve front panel to start up a Server Diagnostics EFI NetBoot image:
1 Turn o the Xserve.
2 Hold down the system identier button and press the on/standby button. Continue
holding down the system identier button until the top row of lights blink in
sequence.
System identifier
button
On/standby
button
Top row of lights blink in sequence.
If the two rows of lights on the front panel blink once and the Xserve resumes its
startup sequence, a rmware password is enabled and you need to disable the
password.
For information about disabling the rmware password, see the next section,
“Disabling the Firmware Password.”
3 When you release the system identier button, the lower-right light should turn on.
Lower-right light comes on.
4 Press the system identier button again. The lights in the bottom row should now be
advancing right to left.
Bottom row of lights advances
right to left.
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

Commentaires sur ces manuels

Pas de commentaire