Apple Xserve Intel (Late 2006) DIY Procedure for Front P Manuel d'utilisateur télécharger pdf (Page 6)

Xserve (Late 2006) Front Panel Board Replacement Instructions 6

Replacing the Locking Mechanism Rod

Insert the key-hole end of the rod into the port on the front bezel.

Note: Make sure the small circle on the front of the rod points to the left. It should align with

the “unlocked” symbol on the bezel.

Pull back the latch that secures the rod, and gently press the rod down until it clicks into

place.

Closing the Xserve

Replace and secure the cover.

Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve

in the rack.

If the server case was locked, use the enclosure key to lock the security lock on the front

panel.

1 2 3 4 5 6 7

Pas de commentaire

Apple Xserve Intel (Late 2006) DIY Procedure for Front P Manuel d'utilisateur Page 6