Apple Xserve G5 Guide de l'utilisateur télécharger pdf (Page 16)

16 Chapter 1

Installing Your Xserve G5 PCI Hardware RAID Card

Replace the PCI fan and cover by connecting the fan's cable, lining up the fan's post

with the post on the logic board, and pressing the fan and cover into place.

The SATA cables should be tucked under the housing of the PCI fan and should not

interfere with fan operation.

Close the server and reinsert it in the rack. Reconnect all cords and cables.

Route the cables on the bottom of the chassis running them along

the side. Pass the cable in between the two plastic card guides.

Make sure that the

cables don’t obstruct the

installation of the PCI fan

and cover, or interfere with

the fan’s operation.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Pas de commentaire

Apple Xserve G5 Guide de l'utilisateur Page 16