Apple Processor Cage and Clips Guide d'installation télécharger pdf (Page 19)

Service Processor

The HP 3PAR StoreServ 7000 Storage system can include an HP 3PAR Service Processor (SP) or

a Virtual Service Processor (VSP). If your configuration includes an SP, it is located at the bottom

of the rack under the enclosures and above the PDUs.

Figure 12 HP 3PAR Service Processor DL 320e

For more information, see “Connecting to a Physical Service Processor” (page 67).

Power Distribution Units

In each HP G3 rack, two PDUs are mounted horizontally at the bottom of the rack, numbered 0–1

from bottom to top. The default configuration for the HP Intelligent Series Racks is two PDUs mounted

vertically at the bottom of the rack so to provide a front-mounting unit space.

Make sure there is enough clearance for service. For example, the PDUs mounted vertically at the

back of a rack must have enough clearance to remove node and drive chassis power supples.

NOTE: Depending on the configuration, PDUs can be mounted vertically.

Understanding Component Numbering 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 116 117

Pas de commentaire

Apple Processor Cage and Clips Guide d'installation Page 19