Apple Xserve (Early 2008) DIY Procedure for Enclosure Manuel d'utilisateur télécharger pdf (Page 37)

Xserve (Late 2006/Early 2008) Front Panel Board Cable Replacement Instructions 5

Installing the Replacement Front Panel Board Cable

Connect the replacement front panel board cable to the front panel board and the logic board.

Replacing the Left PCI Riser Card

Align the left riser card with its slot on the logic board and press to seat the riser.1.

Tighten the captive screws that secure the riser bracket to the back panel.2.

Replacing the Airow Duct

Lower the airow duct into position on the logic board. 1.

Note: When installing the airow duct, be sure to route both the front panel board cable and

the backplane-to-logic board I/O cable inside the channel under the left side of the duct.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 168 169

Pas de commentaire

Apple Xserve (Early 2008) DIY Procedure for Enclosure Manuel d'utilisateur Page 37