Apple Xserve Intel (Late 2006) DIY Procedure for Logic B Manuel d'utilisateur télécharger pdf (Page 15)

Xserve (Late 2006) Logic Board Replacement Instructions 15

Installing the Replacement Logic Board

Important: When replacing the logic board, make sure the board’s rear port connectors t

through the appropriate openings in the Xserve’s back panel. Take special care to t the clear

plastic system identier button through its opening. Don’t bend or ex the logic board.

With the front edge of the board raised 1–2 inches (3–5 cm), guide the connectors on the

back edge of the board into the openings in the back panel of the enclosure, and then lower

the front edge of the board into place.

Remove the battery insulator tab from the battery holder on the replacement logic board.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 24 25

Pas de commentaire

Apple Xserve Intel (Late 2006) DIY Procedure for Logic B Manuel d'utilisateur Page 15