Apple Xserve Intel (Late 2006) DIY Procedure for Logic B Manuel d'utilisateur télécharger pdf (Page 17)

Xserve (Late 2006) Logic Board Replacement Instructions 17

Clean o any existing thermal grease on the top face of the rst processor using an alcohol

wipe provided with the replacement logic board. Be careful not to get any thermal grease on

the processor contacts. Save the alcohol wipe and package for later.

Apply the contents on a single syringe of thermal grease (approximately 4.5 cc) to the top

surface of the processor.

Important: Be sure not to get any grease anywhere on the processor other than the very

top, at surface that directly contacts the heat sink.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Pas de commentaire

Apple Xserve Intel (Late 2006) DIY Procedure for Logic B Manuel d'utilisateur Page 17